Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.937 - 941, 2023/11
In the J-PARC 3GeV Rapid Cycling Synchrotron (RCS), the 400MeV H
beam is changed to H+ beam by a charge exchange foil and accelerated to 3GeV. So far, RCS had used two types of charge exchange foil. One is the HBC (Hybrid Boron mixed Carbon) foil and the other is the Kaneka GTF (Graphene Thin Film). HBC foil is a patented deposition method developed at KEK for the stable production of thick carbon foil. Initially, the RCS used HBC foil produced atKEK. However, in 2017, JAEA had started HBC foil production and has been using it since then. Recently, we have succeeded in depositing thick pure carbon foil, which had been considered difficult to produce by the arc deposition method. As a new challenge, this pure carbon foil was used in the user operation from March 2023. As a result, Pure carbon foils showed less deformation and more stable charge exchange performance than HBC and GTF.
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.629 - 633, 2023/01
In the J-PARC 3-GeV Rapid Cycling Synchrotron (RCS), a 400 MeV H- beam injected from the linac is exchange to an H+ beam by a charge exchange foil and accelerated to 3 GeV. The charge exchange foils mainly used in the RCS are HBC foil (Hybrid Boron mixed Carbon stripper foil), which are made by adding a small amount of boron to carbon rods and using them as electrodes by the arc deposition method. Since 2018, foils produced by JAEA have been used for user operation. So far, no major problems have occurred due to the foils. Meanwhile, the beam power of the RCS has been gradually increased from 500 kW to 830 kW since 2018. As beam power increases, the foil issues were identified to achieve the RCS design power of 1 MW. In this paper, we will report on the recent foil usage status and issue in the user operation.
Ono, Ayato; Takayanagi, Tomohiro; Sugita, Moe; Ueno, Tomoaki*; Horino, Koki*; Yamamoto, Kazami; Kinsho, Michikazu
JAEA-Technology 2021-044, 53 Pages, 2022/03
JAEA-Technology-2021-044.pdf:43.7MB
The 3-GeV rapid cycling synchrotron of Japan Proton Accelerator Research Complex (J-PARC) uses a large number of electromagnet power supplies in order to manipulate a high-intensity beam of 1 MW. These devices have been specially developed to meet the requirement to achieve acceleration of the 1-MW proton beams. Because J-PARC has been in operation for 10 years, we have to replace many parts and equipments due to failures caused by age-related deterioration. J-PARC accelerator system supplies the beams for many users, and we have to recover it as soon as possible when a trouble occurs. Therefore, if the trouble can be prevented before it happens, reduction of the user beam time can be minimized. Furthermore, it enables us to reduce additional work for operators. Maintenance is important to keep the equipments in a normal state, and makes it possible to extend the life of the equipments by detecting and maintaining the faulty parts and the aged deterioration parts at an early stage. Since all the devices requires the maintenance, there are a wide variety of maintenance methods. Some works are carried out by the J-PARC members, and some are performed by outsourcing. Ensuring safety and protecting workers are the most important issues in maintenance work. Therefore, J-PARC has rules for safety work. All workers in J-PARC have to learn and follow the rules. In addition, various ideas are being considered to enable safe and efficient work by devising ingenuity in each work. We also elaborate various ideas and processes for safe and efficient work according to the individual work conditions. In this report, we summarize the guideline and cautionary points during maintenance based on the actual case of maintenance and inspection work of the horizontal shift bump electromagnet power supply.
Ono, Ayato; Takayanagi, Tomohiro; Ueno, Tomoaki*; Horino, Koki*; Yamamoto, Kazami; Kinsho, Michikazu
JAEA-Technology 2021-005, 40 Pages, 2021/05
JAEA-Technology-2021-005.pdf:4.27MB
The 3-GeV rapid cycling synchrotron of Japan Proton Accelerator Research Complex (J-PARC) uses a large number of electromagnet power supplies in order to manipulate a high-intensity beam of 1 MW. These devices have been specially developed to meet the requirement to achieve acceleration of the 1-MW proton beams. State-of-the-art technologies are used to these devices. To achieve stable operation with few failures, and to prevent major troubles in the event of a failure, it is necessary to maintain the performance of the devices under the appropriate and accurate management strategy with an enough understanding of its characteristics. However, since the specification and function of each device is different respectively, and it is also produced by different manufacturer, we have to maintain adequately according to the structure, configuration and features of the apparatus. There are typically three major stages in the maintenance works. First, "Daily inspection" is constantly performed to monitor the status of the equipment during operation and check for any errors or abnormalities. Second, "Routine maintenance" is carried out weekly, monthly, or yearly to fix the errors, or to replace the parts that are deteriorated. Third, "Troubleshooting" is conducted to recover from sudden failures. In this report, we will introduce the specific contents of "Routine maintenance", "Daily inspection", and "trouble case" based on the experiences of the electromagnet power supply group. In particular, we will report the work management methods, including ideas for facilitating recovery work. We will also summarize the important points of a matter that does not depend on the configuration, structure, and characteristics of the equipment.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
JPS Conference Proceedings (Internet), 33, p.011050_1 - 011050_6, 2021/03
R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and aluminum and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.
Ono, Ayato; Takayanagi, Tomohiro; Ueno, Tomoaki*; Horino, Koki*; Yamamoto, Kazami; Kinsho, Michikazu
JAEA-Technology 2020-023, 40 Pages, 2021/02
JAEA-Technology-2020-023.pdf:2.98MB
The 3 GeV rapid cycling synchrotron of Japan Proton Accelerator Research Complex (J-PARC) uses a large number of electromagnet power supplies in order to generate a high-intensity beam of 1 MW. These devices have been specially developed to meet the required specifications of the proton beams. Ten years have passed since the 3 GeV synchrotron had started operation, and we need to replace and update of the components due to failures caused by the aging deterioration. Since the J-PARC is used by many users, it is quite important to recover as soon as possible when a trouble occurs. However, we often spend lots of time to investigate the status and cause of the problem, then it results in the delay of recovery work. One of the major reasons is due to the differences in the manufacturers of sensors and monitors. Therefore, we have to create a manual for each power supply and prepare some exclusive tools. However, troubles rarely occur in the same state and situation, so we have to rely on the experience and knowledge. Even for power supplies with different purposes and specifications, some components, such as sensors, can be shared in many cases. In addition, if the concept of the interlock system, for monitoring the status of the power supply and detecting malfunctions, is shared between the different power supplies, the method and response for failure investigation can be standardized. By using a device with good maintainability, the accelerator operation will be more stable and reliable. In this report, we introduce the necessity of sharing the design concept and common parts. We also explain the basic design model for safety and reliability, using an example of manufacturing an electromagnet power supply for the 3 GeV synchrotron.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
EPJ Web of Conferences, 239, p.06006_1 - 06006_4, 2020/09
Times Cited Count：0 Percentile：0.1(Nuclear Science & Technology)R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
JPS Conference Proceedings (Internet), 28, p.061004_1 - 061004_6, 2020/02
no abstracts in English
Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Hiroki
Journal of Nuclear Science and Technology, 55(8), p.955 - 961, 2018/08
Times Cited Count：5 Percentile：46.12(Nuclear Science & Technology)We have started an experimental program to measure activation cross sections systematically in the proton-induced spallation reaction in structural materials commonly used in high-intensity proton accelerator-based facilities, such as Japan Proton Accelerator Research Complex (J-PARC). As the first step of the program, aluminum (Al) was chosen to verify the adequacy of the measurement technique implemented in a J-PARC proton beam environment because data of Al have been relatively well studied both by experimental measurement and simulation. Activation cross sections of 
Be, 
Na, and 
Na in Al were measured at proton energy points from 0.4, 1.3, 2.2 to 3.0 GeV, which could be delivered smoothly from the synchrotron. The validity of experimental data has been verified by introducing an effective proton numbers determination procedure. We compared the measured data with existing experimental data, the evaluated data (JENDL-HE/2007), and the calculations with several intra-nuclear cascade models by the Particle and Heavy Ion Transport code System (PHITS) code. Although the experimental data agreed with JENDL-HE/2007, the calculations underestimated about 40%. This could come from the evaporation model (generalized evaporation model) being implemented in the PHITS code. We found that the calculations agreed with the experimental data by an upgraded PHITS code.
Yamamoto, Kazami; Saha, P. K.
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.1045 - 1047, 2018/06
The 3 GeV rapid cycling synchrotron (RCS) at the Japan Proton Accelerator Research Complex (J-PARC) provides more than 500 kW beams to the Material and Life Science Facility (MLF) and Main Ring (MR). In such a high-intensity hadron accelerator, even losing less than 0.1% of the beam can cause many problems. Such lost protons can cause serious radio-activation and accelerator component malfunctions. Therefore, we have conducted a beam study to achieve high-power operation. In addition, we have also maintained the accelerator components to enable stable operation. This paper reports the status of the J-PARC RCS over the last two years.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Iwamoto, Hiroki; Hasegawa, Shoichi; Maekawa, Fujio; Yoshida, Makoto*; Ishida, Taku*; Makimura, Shunsuke*; Nakamoto, Tatsushi*
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.499 - 501, 2018/06
no abstracts in English
Yamamoto, Kazami
EPJ Web of Conferences, 153, p.07022_1 - 07022_6, 2017/09
Times Cited Count：1 Percentile：61.21(Nuclear Science & Technology)The J-PARC 3 GeV Rapid Cycling Synchrotron (RCS) delivers a 1-MW, high-intensity beam to the following facilities. In such high-intensity accelerator, the operational beam intensity is limited to keep the exposure to the workers by the residual dose within acceptable tolerances. Therefore we continue to commission the accelerator system to reduce the beam loss. In order to achieve further high-intensity operation, the J-PARC accelerator system was drastically upgraded (Increment of the injection energy of RCS and peak current of Linac) over the past two years. After the upgrade, the beam loss was decreased by the commissioning. The output power was increased; nevertheless the residual doses were kept same level or decreased. Since we replaced the broken collimator which was higher activated, we kept the exposure to the workers within acceptable level.
Oi, Motoki; Meigo, Shinichiro; Akutsu, Atsushi*; Kawasaki, Tomoyuki; Nishikawa, Masaaki*; Fukuda, Shimpei
Proceedings of 12th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '15), p.89 - 96, 2016/00
At J-PARC, 3 GeV proton beam with power of 1MW is delivered to the spallation neutron source (JSNS) through beam transport line called 3NBT. At the high power accelerator facilities even a small abnormal event has a possibility to be critical so that the beam control system is crucial. In order to find tiny anomaly, rapid data analysis system is required. We developed control and data analysis system based on the Experimental Physics and Industrial Control System (EPICS) and Control System Studio (CSS). To carry out beam tuning efficiently, the beam control system based on the Strategic Accelerator Design (SAD) code has been developed. With the several shots of beam and by the one click of operational panel of the screen, required magnet field can be calculated and set automatically. Also we developed automated e-mail system to announce the abnormal event to the experts persons. With these systems, we can reduce both beam tuning time and down time.
Kinsho, Michikazu
Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.3798 - 3800, 2015/06
Beam power of routine operation of the J-PARC rapid cycling synchrotron (RCS) increased gradually for the MLF user operation, beam power of 400 kW was achieved on 10th March, and 500 kW user operation has been stably performed from 14th April this year. Beam studies were also performed to demonstrate the capability of the RCS to operate at powers in excess of 1 MW. The study produced a beam intensity of 8.41
10
protons during short time, an intensity equivalent to 1.01 MW operation on 10th January 2015. In this beam study it was cleared issues to realize 1MW operation in the RCS. Status of user operation and issues to realize high power operation in the RCS are presented.
Yamamoto, Kazami; Hayashi, Naoki; Okabe, Kota; Harada, Hiroyuki; Saha, P. K.; Yoshimoto, Masahiro; Hatakeyama, Shuichiro; Hotchi, Hideaki; Hashimoto, Yoshinori*; Toyama, Takeshi*
Proceedings of 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity, High Brightness and High Power Hadron Beams (HB 2014) (Internet), p.278 - 282, 2015/03
Rapid Cycling Synchrotron (RCS) of Japan Proton Accelerator Complex (J-PARC) is providing more than 300 kW of proton beam to Material and Life science Facility (MLF) and Main Ring (MR). Last summer shutdown, a new ion source was installed to increase output power to 1 MW. In order to achieve reliable operation of 1 MW, we need to reduce beam loss as well. Beam quality of such higher output power is also important for users. Therefore we developed new monitors that can measure the halo with higher accuracy. We present beam monitor systems for these purposes.
Kinsho, Michikazu
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.3382 - 3384, 2014/07
Big issue for the J-PARC rapid cycling synchrotron (RCS) was displacement of main magnets caused by last big earthquake because this made beam loss more than 400 kW beam power. Since realignment of main magnets and other components was essential to realize higher beam power and stable operation, this work has been done during maintenance period in 2013. To achieve the nominal performance 1MW beam power at the RCS and 0.75 MW at the MR, beam energy of linac was increased from 181 MeV to 400 MeV with a new accelerating structure ACS (Annular-ring Coupled Structure) linac from this January. It was successful 400 MeV beam injection and 3 GeV beam extraction at the RCS, and user operation has been performed with beam power of 300 kW. An equivalent beam power of 560 kW with a beam loss of only 0.3% could be achieved during short time for high intensity beam study.
Kinsho, Michikazu; Saito, Yoshio*; Kabeya, Zenzaburo*; Ogiwara, Norio
Vacuum, 81(6), p.808 - 811, 2007/02
Times Cited Count：7 Percentile：30.11(Materials Science, Multidisciplinary)It was success to develop alumina ceramics vacuum ducts for the 3GeV-RCS of J-PARC at JAERI. There are two types of alumina ceramics vacuum ducts needed, one being 1.5m-long duct with a circular cross section of 378 mm inner diamater for use in the quadrupole magnet, the other being 3.5m-long and bending 15 degrees, with a race-track cross section for use in the dipole magnet. These ducts could be manufactured by joining several duct segments of 0.8 m in length by brazing. The alumina ceramics ducts have copper stripes on the outside surface of the ducts to reduce the duct impedance. The radio-frequency shield is designed as a high frequency pass filter, where eddy currents cannot be generated. In this shield one end of each strope is connected to a titanium flange with a capacitor to interrupt the eddy current loop. With this, the impedance of the duct with the radio-frequency shield was reduced within an allowable desgin limit. In order to reduce emission of secondary electrons when protons or electrons strike the surface, TiN film is coated on the inside surface of the ducts.
Kamiya, Junichiro; Ueno, Tomoaki*; Takayanagi, Tomohiro
IEEE Transactions on Applied Superconductivity, 16(2), p.1362 - 1365, 2006/06
Times Cited Count：5 Percentile：33.55(Engineering, Electrical & Electronic)Kicker magnets in J-PARC RCS are being constructed at JAERI (Japan Atomic Energy Research Institute) as the extraction pulse magnet. It is designed to have a large aperture in order to accept the maximum beam power 1MW. Therefore the impedance mismatch and fringe field have the large effect on distortion of a flatness of the kicker magnetic field. We examined their effect by the simulation and measurement, and contrived to improve the field flatness. In this paper, we present the features of the RCS kicker systems, describe the magnetic field measurement and improvement, and briefly introduce the field mapping which we are performing now.
Takayanagi, Tomohiro; Kamiya, Junichiro; Watanabe, Masao; Yamazaki, Yoshishige; Irie, Yoshiro; Kishiro, Junichi; Sakai, Izumi*; Kawakubo, Toshimichi*
IEEE Transactions on Applied Superconductivity, 16(2), p.1358 - 1361, 2006/06
Times Cited Count：16 Percentile：60.93(Engineering, Electrical & Electronic)The injection bump system of the 3-GeV RCS in J-PARC consists of the pulse bending magnets for the injection bump orbit, which are four horizontal bending magnets (shift bump), four horizontal painting magnets (h-paint bump), and two vertical painting magnets (v-paint bump). In this paper, the design of the magnets and power supply of the injection bump system are reported.
Takayanagi, Tomohiro; Kamiya, Junichiro; Watanabe, Masao; Ueno, Tomoaki*; Yamazaki, Yoshishige; Irie, Yoshiro; Kishiro, Junichi; Sakai, Izumi*; Kawakubo, Toshimichi*; Tounosu, Shigeki*; et al.
IEEE Transactions on Applied Superconductivity, 16(2), p.1366 - 1369, 2006/06
Times Cited Count：8 Percentile：43.78(Engineering, Electrical & Electronic)The injection system of the 3-GeV RCS in J-PARC is composed of four main orbit bump magnets (shift bump) to merge the injection beam with the circulating beam. The magnetic field design and the structural analysis of the shift bump magnets have been performed using 3D magnetic and mechanical codes. In this paper, the design of the bending magnets is reported.
